Brewing equipment Carbonating Keg Lid with 0.5 Micron Carb stone Kegging Homebrew Corny Beer Keg Lid Brewing equipment

Carbonating Keg LidThe easiest way to carbonate beer. Allows you to force carbonate quickly using the attached 0.5 micron stone with the portability of being able to move the lid from keg to keg. No more hassles of trying to attach and unattach line from the "gas in" dip tube. Simply connect your gas quick disconnect to the included fitting on the lid and allow carbonation to begin. Sometimes also called a carbonater.Move the lid from keg to keg to carbonate as needed.Features:1.This Carbonating Keg Lid is a corny keg lid with an extra CO bulk head.2.Lid comes complete with two feet of 1/4"ID beveragetubing(FDA Rated), two ss clamps, and a 0.5 micron carb stone 3.Allows you to inject CO into your kegged beer from the bottom for rapid carbonation4.Fits Cornelius, Firestone, and Spartanburg brand kegs with 3" by 3-1/2" oval lids5.This keg lid includes an integral pressure relief valve and a lid sealing O ringHow to use this product:Beer must be stored cold 3440°F1. Preboil the stone for 23 minutes before using. This assures you that your stone is sterile and any residual oils have been boiled off.2. Sanitize the whole keg lid before submersing into your keg filled with beer.3. Set your PSI on your regulator to 34psi and attach your gas in fitting to the body connect on the lid. Leave keg at this pressure for 1 hour.4. Raise your pressure 2PSI per hour until you reach 1012psi. Leave it at 1012psi for 24 hours. Pour a pint and test the carbonation. If you think your beer needs more CO2 leave for another 46 hours and have another pint.5. Remove carbonation lid after carbonation level is satisfactory. Return original keg lid for long term storage.==========Product Type : Carbonation Equipment

• 1.This Carbonating Keg Lid is a corny keg lid with an extra CO bulk head.
• 2.Lid comes complete with two feet of 1/4"ID beveragetubing(FDA Rated), two ss clamps, and a 0.5 micron carb stone
• 3.Allows you to inject CO into your kegged beer from the bottom for rapid carbonation
• 4.Fits Cornelius, Firestone, and Spartanburg brand kegs with 3" by 3-1/2" oval lids
• 5.This keg lid includes an integral pressure relief valve and a lid sealing O ring